View Single Post
      09-19-2011, 03:11 PM   #8
MDORPHN
Colonel
292
Rep
2,898
Posts

Drives: AW 1M
Join Date: Oct 2010
Location: Wash, DC

iTrader: (0)

If you go to coilovers, there are lots of quality camber plates available -- Vorshlag, TC Kline, etc.

However, with the stock springs, only Ground Control has adjustable plates available (originally made for E9x M3). Dinan has fixed plates that add 0.7 degrees camber.

RRT Racing installed them on my car and found a number of design problems. Among other things, when the nuts were tightened to the spec stamped on the plate (18 ft-lbs, IIRC), the studs pulled right through the plate and the plate itself deformed. Also, the studs interfered with the mounts for the strut bar, so they had to be shortened. Nothing major, but shouldn't happen on a very pricey ($499) camber plate.

Neil
Appreciate 0