[JimD]

I would look for the DIY for changing the ash tray to a tray by Andy M. I think it has the console pull. You have to unsnap the trim around the shift, unscrew the screws under the trim, pull a screw in the middle on the passenger side (under a small cover), remove the accessory outlet and aux port and USB port wiring (if you have it) and pull the shift knob. The shift knob is the worst. You have to pull HARD up. The handbrake cover unclips and is held on by a tie wrap in the back. Another screw under the handbrake cover. There is also a push pin in the front in the footwell area on each side.

Jim