04-08-2023, 09:37 PM | #1 |
New Member
13
Rep 5
Posts |
Warnings after Valve cover gasket Replacement
I tackled a Valve Cover replacement on my 2014 X5 (F15 N55), seemed simple enough after reading everything that needed to be done. I unplug the batter at left it unpluged for over 24 hours, however I don't think there was anything sensitive during the entire project that may cause these issues.
these warning were not being displayed before I started. Did i accidently moved or unplugged something? any assistance is greatly preactivated.. thank you in advance. |
04-10-2023, 07:38 PM | #3 | |
New Member
13
Rep 5
Posts |
Quote:
thank you for the reply, I actually did that to no avail, it is worth a try to do it again. I did have a friend with an autel scanner and was able to reset the Steering Angle sensor, this remove the Chassis stabilization Drive Moderately warning. however the other two remain. |
|
Appreciate
0
|
04-23-2023, 04:17 PM | #4 |
New Member
13
Rep 5
Posts |
Update - these warnings were non-stop for a while, it seems they have been finally cleared after multiple resets of the steering angle sensor (i think), i even lifted the vehicles front end and let ISAT+ perform a calibration. So after 10 or so days, yesterday was the day without warning.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|