[FZI89]

Originally Posted by kwbuys

Actually, wouldn't the mirror cap replacement be just item 2? that's how I got mine changed on the F40.

Nope! I checked with bmw and the way they made these mirror caps is different. If you look at part 3, it slots into part 2 (marked in red). If you compare the image to the standard mirror caps, it will be more clear

[rightfootedsloth]

Originally Posted by FZI89

Nope! I checked with bmw and the way they made these mirror caps is different. If you look at part 3, it slots into part 2 (marked in red). If you compare the image to the standard mirror caps, it will be more clear

Ahh.. bummer! How annoying! I see that now, that little protrusion on the housing.

They really want to make it difficult for non-M rides to get those wing mirrors! Haha..

[jocamryn]

Carbon fiber. These available yet?

[FZI89]

Originally Posted by rightfootedsloth

Ahh.. bummer! How annoying! I see that now, that little protrusion on the housing.

They really want to make it difficult for non-M rides to get those wing mirrors! Haha..

I’ve placed an order for the parts, and hoping to get them within the next two weeks. Unfortunately, the mirror caps only come primed and not painted (although the retaining pieces come painted!!), so I’ll have to get them professionally painted upon delivery.

It was an absolute pain ordering them. It seems that offer three different versions (to fit either DAPro, DAPlus, and/or Park assistant/park assistant plus.

I’ll update once received!

[FZI89]

Finally got the M35i mirror caps delivered.

The retaining pieces already come painted, but the mirror caps are only available primed.

Sent them to the paint shop this morning. Will be ready by Friday/early next week.

[JUN WOOK BANG]

Can you tell me the product number?
I recently worked on the 35i Kidney Grill myself in South Korea, and I worked on the front splitter. I'll update you soon.
I want to share information together and make X1 a good car.

[FZI89]

Originally Posted by JUN WOOK BANG

Can you tell me the product number?
I recently worked on the 35i Kidney Grill myself in South Korea, and I worked on the front splitter. I'll update you soon.
I want to share information together and make X1 a good car.

Here you go:

[JUN WOOK BANG]

Thank you. ^^
It's the best.:

[FZI89]

Painted and installed. They look great

[timesone]

Originally Posted by FZI89

Painted and installed. They look great

Wow!

[JuRik99]

Congrats, it looks great!
Is it difficult to disassemble the mirror?

[FZI89]

Originally Posted by JuRik99

Congrats, it looks great!
Is it difficult to disassemble the mirror?

Quite straight forward tbh! Just don’t rush it, otherwise you might end up scratching the mirror caps or pulling out a wire.

[JUN WOOK BANG]

Originally Posted by FZI89

Painted and installed. They look great

That's a nice shot^^
It's the best work ever

[Auriemma]

Originally Posted by gqbriel

I can tell you at 1000% it doesnt need anything...do u seriously think BMW will change assembley for the whole mirror for the least sold model from the range?
Its just the plastic cap as in general its a spare part.

On the question - i feel like they dont have it listed in here i would go with non oem one as its all abs plastic

i guess the rear trunk "spoiler" follow the same logic - only via the car and from BMW

BMW will charge you $700 for an entire turn signal assembly (lens and all) because a $5 control board inside it goes bad. And yes, controller replacement takes 10 minutes to swap out. The only sell the assembly, not the cheapest replaceable part.

[FZI89]

Originally Posted by oldbean

By any chance do you have the part numbers for RHD version?

Thanks In Advance.

Sorry, don’t have them at hand, but if you go to any bmw parts seller website (e.g. leebmann24), you can find the parts number from the parts catalogue