10-12-2014, 07:36 PM | #1 |
@obriennathaniel_f30 on Instagram
515
Rep 1,062
Posts
Drives: 582whp/596wtq '13 335i
Join Date: Jan 2014
Location: Houston,Tx ig:obriennathaniel_f30
|
New Idrive Software
So while my '13 335i is in the shop getting the DME replaced, im driving a '15 328i loaner and WTF the iDrive software is so much better than my '13. is there any way to get that in my '13?
__________________
CG Precision VS-1 Exhaust\DR-1 DownPipe | PS2 Turbo\Inlet | PDU PI w/Fuel-it platinum kit & E sensor | GFB DV+ Diverter Valve | BM3 w/AIC2-V|Tune CaryTheLabelGuy | Full E85 | ATM FMIC | ER Chargepipe Inlet/Outlet | AFE Intake | BC Coilovers | PSS 255/40-275/35 Velos Designwerks S3 two piece 19x9/19x10 | Osram Xenarc | LED retro | AWRON digital AC gauge| |
10-12-2014, 07:47 PM | #2 |
First Lieutenant
93
Rep 390
Posts |
Not easily. You would have to update the hardware from CIC to NBT. There are a few threads on this but it seems like a major undertaking. I have a 2013 and had a 2014 loaner with the new system and I agree with you that it is superior.
__________________
Best,
Charlie 2013 328i MSport Estoril Blue, 6spd MT, Premium, Tech & Drivers Assist +, Bavsound Stage One/Ghost, Bimmertech Amp |
Appreciate
0
|
10-17-2014, 02:12 PM | #3 |
@obriennathaniel_f30 on Instagram
515
Rep 1,062
Posts
Drives: 582whp/596wtq '13 335i
Join Date: Jan 2014
Location: Houston,Tx ig:obriennathaniel_f30
|
hmm, ill have to look into it. thanks for the info!
__________________
CG Precision VS-1 Exhaust\DR-1 DownPipe | PS2 Turbo\Inlet | PDU PI w/Fuel-it platinum kit & E sensor | GFB DV+ Diverter Valve | BM3 w/AIC2-V|Tune CaryTheLabelGuy | Full E85 | ATM FMIC | ER Chargepipe Inlet/Outlet | AFE Intake | BC Coilovers | PSS 255/40-275/35 Velos Designwerks S3 two piece 19x9/19x10 | Osram Xenarc | LED retro | AWRON digital AC gauge| |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|