[LukeS1994]

I know the headlight wash interval is time not the amount of times you wash your windscreen.... Can this be coded as the washers are really good it's just they never wash it's really annoying? I think there must be something I can code to change this ?

[inTgr8r]

I thought it was every third cycle, but I could be wrong.
There's a good chance that it can be coded, but I haven't come across it yet myself. (I removed Mine)

[TMD29]

You can try these:

FEM_BODY 3080 WW_SCHEINWERFERREINIGUNG nicht_aktiv aktiv Completely disables the Headlamp Washers
FEM_BODY 3081 WW_ANZAHL_NACHWISCHZ_FRONT — 3_mal_Nachwischen Windshield wipe cycles after washing
FEM_BODY 3080 WW_ANZAHL_SPRITZIMPULSE_SRA 3_Impulse 2_Impulse Number of headlamp spray pulses
FEM_BODY 3080 WW_ANZAHL_WASCHBET_ZUR_SRA User Value 10_Betaetigungen Number of washes before headlamp wash reactivation
FEM_BODY 3080 WW_.DAUER_SPRITZIMPULSE_SRA User Value werte=0A (1000ms) Changes how long it washes per pulse (Value in 100ms)
FEM_BODY 3080 WW_SRA_GESCHWINDIGKEITS_DEAKTIVIERUNG User Value werte=82 (130km/h) Max Speed to activate Headlamp Washers
FEM_BODY 3080 WW_PAUSE_SPRITZIMPULSE_SRA User Value werte=0A(1000ms) Change the pause is between wash pulses (Value in 100ms)
FEM_BODY 3080 WW_SRA_SPERRZEIT User Value werte=0A (10min) Change the wait time is before reactivation (Value in 1min)

[LukeS1994]

Originally Posted by TMD29

You can try these:

FEM_BODY 3080 WW_SCHEINWERFERREINIGUNG nicht_aktiv aktiv Completely disables the Headlamp Washers
FEM_BODY 3081 WW_ANZAHL_NACHWISCHZ_FRONT — 3_mal_Nachwischen Windshield wipe cycles after washing
FEM_BODY 3080 WW_ANZAHL_SPRITZIMPULSE_SRA 3_Impulse 2_Impulse Number of headlamp spray pulses
FEM_BODY 3080 WW_ANZAHL_WASCHBET_ZUR_SRA User Value 10_Betaetigungen Number of washes before headlamp wash reactivation
FEM_BODY 3080 WW_.DAUER_SPRITZIMPULSE_SRA User Value werte=0A (1000ms) Changes how long it washes per pulse (Value in 100ms)
FEM_BODY 3080 WW_SRA_GESCHWINDIGKEITS_DEAKTIVIERUNG User Value werte=82 (130km/h) Max Speed to activate Headlamp Washers
FEM_BODY 3080 WW_PAUSE_SPRITZIMPULSE_SRA User Value werte=0A(1000ms) Change the pause is between wash pulses (Value in 100ms)
FEM_BODY 3080 WW_SRA_SPERRZEIT User Value werte=0A (10min) Change the wait time is before reactivation (Value in 1min)

Well done mate!! I'll try those thanks

[LukeS1994]

Originally Posted by TMD29

You can try these:

FEM_BODY 3080 WW_SCHEINWERFERREINIGUNG nicht_aktiv aktiv Completely disables the Headlamp Washers
FEM_BODY 3081 WW_ANZAHL_NACHWISCHZ_FRONT — 3_mal_Nachwischen Windshield wipe cycles after washing
FEM_BODY 3080 WW_ANZAHL_SPRITZIMPULSE_SRA 3_Impulse 2_Impulse Number of headlamp spray pulses
FEM_BODY 3080 WW_ANZAHL_WASCHBET_ZUR_SRA User Value 10_Betaetigungen Number of washes before headlamp wash reactivation
FEM_BODY 3080 WW_.DAUER_SPRITZIMPULSE_SRA User Value werte=0A (1000ms) Changes how long it washes per pulse (Value in 100ms)
FEM_BODY 3080 WW_SRA_GESCHWINDIGKEITS_DEAKTIVIERUNG User Value werte=82 (130km/h) Max Speed to activate Headlamp Washers
FEM_BODY 3080 WW_PAUSE_SPRITZIMPULSE_SRA User Value werte=0A(1000ms) Change the pause is between wash pulses (Value in 100ms)
FEM_BODY 3080 WW_SRA_SPERRZEIT User Value werte=0A (10min) Change the wait time is before reactivation (Value in 1min)

Hi mate,

I changed : FEM_BODY 3080 WW_ANZAHL_WASCHBET_ZUR_SRA User Value 10_Betaetigungen Number of washes before headlamp wash reactivation

I changed it from 10 to 05, then it seemed to not wash the headlights atall, I have coded it back now fingers crossed it will start working again tomorrow, any ideas whats gone on there? I checked all the washer system settings and that it was set to activ they were all fine and I only amended the above thinking it would wash the headlights every 5 blips of the washers but it was not working atall then.

Fingers crossed it will be back working tomorrow.

Any ideas on this?

thanks

[TMD29]

Originally Posted by LukeS1994

Hi mate,

I changed : FEM_BODY 3080 WW_ANZAHL_WASCHBET_ZUR_SRA User Value 10_Betaetigungen Number of washes before headlamp wash reactivation

I changed it from 10 to 05, then it seemed to not wash the headlights atall, I have coded it back now fingers crossed it will start working again tomorrow, any ideas whats gone on there? I checked all the washer system settings and that it was set to activ they were all fine and I only amended the above thinking it would wash the headlights every 5 blips of the washers but it was not working atall then.

Fingers crossed it will be back working tomorrow.

Any ideas on this?

thanks

Hmm...I assume you tried while the headlights were on (at night) and driving? You edited the Betaetigungen and not only just changed the Werte value below correct?

[LukeS1994]

Originally Posted by TMD29

Hmm...I assume you tried while the headlights were on (at night) and driving? You edited the Betaetigungen and not only just changed the Werte value below correct?

I just edited the main value not the Werte value. I've changed it back and now they work how weird.