Tool MS00084

oma3710 · 10-18-2019, 07:53 AM

Is there any other tool beside the ms00084 to replace the EPS steering thrust piece? And if someone has it I am willing to pay for shipping back and forth if you let me borrow it.

oma3710 · 10-21-2019, 07:12 PM

Anybody? I can give u a deposit until I return tool.

frenchi · 10-23-2019, 04:06 AM

This one works pretty well it's cheap and you can sell it once your job is done

https://www.ebay.co.uk/itm/Bmw-Steer...1&isGTR=1#shId

Billfitz · 10-23-2019, 07:01 AM

It won't be so cheap to ship it across the Atlantic. However, it does show how to do what I would do if I needed one, which is to make one.

oma3710 · 10-23-2019, 07:44 AM

Quote:

Originally Posted by frenchi

This one works pretty well it's cheap and you can sell it once your job is done

https://www.ebay.co.uk/itm/Bmw-Steer...1&isGTR=1#shId

I ordered it and plan on selling it after I use it.

Eschmacher · 10-23-2019, 06:21 PM

Quote:

Originally Posted by oma3710

I ordered it and plan on selling it after I use it.

Can i get it after you?

oma3710 · 10-24-2019, 09:15 PM

Quote:

Originally Posted by Eschmacher

Quote:

Originally Posted by oma3710

I ordered it and plan on selling it after I use it.

Can i get it after you?

Where are you located?

Eschmacher · 10-24-2019, 10:30 PM

Quote:

Originally Posted by oma3710

Where are you located?

Virginia

oma3710 · 10-25-2019, 11:26 AM

Quote:

Originally Posted by Eschmacher

Virginia

Once I use it I will let you know. I still havent received it. I paid $46 shipped. I will let it go for $33 shipped. Does that sound fair?

Eschmacher · 10-25-2019, 02:21 PM

Quote:

Originally Posted by oma3710

Once I use it I will let you know. I still havent received it. I paid $46 shipped. I will let it go for $33 shipped. Does that sound fair?

Yup!

fchen0125 · 06-08-2020, 04:48 PM

Quote:

Originally Posted by Eschmacher

Yup!

Hi Eschmacher, did you ever get the tool from Oma3710 ? I am having the same issue and looking for the tool as well , trying to turn it with a spanner tool and didn't work , So wondering if are willing to sell it or rent it for a cost. Appreicated

Thanks

fchen0125 · 06-08-2020, 06:59 PM

Quote:

Originally Posted by oma3710

Once I use it I will let you know. I still havent received it. I paid $46 shipped. I will let it go for $33 shipped. Does that sound fair?

Hi Oma3710, Did tighten the thrust plate fixed your knocking issue? also do you still have the 3pin tool for sale ? Thanks

R32DBP · 06-08-2020, 07:11 PM

eBay link is dead but if you are trying to tighten the EPS I just used this adjustable spanner tool from Harbor Freight. It worked like a charm and no more clunking from steering. Tightened it up a bit too.

https://www.harborfreight.com/adjust...nch-36554.html

fchen0125 · 06-08-2020, 07:37 PM

Quote:

Originally Posted by R32DBP

eBay link is dead but if you are trying to tighten the EPS I just used this adjustable spanner tool from Harbor Freight. It worked like a charm and no more clunking from steering. Tightened it up a bit too.

https://www.harborfreight.com/adjust...nch-36554.html

I did went and get a spanner but I couldn't turn it even just a tiny bit , too much torque and spanner wasn't snug, kept slipping off and even bending

10-18-2019, 07:53 AM	#1
oma3710 Major 195 Rep 1,282 Posts Drives: ? Join Date: Apr 2012 Location: Simpsonville, SC iTrader: (1)	Tool MS00084 Is there any other tool beside the ms00084 to replace the EPS steering thrust piece? And if someone has it I am willing to pay for shipping back and forth if you let me borrow it. __________________ __________________ SOLD! X5 35i sdrive- JB4 SOLD! 435i- Cary Jordan E30 Tune~ Dinan Turbo~ BM3 trans tune~ XDI-35~ 3.5 T-map sensor~ VRSF HD FMIC~ VRSF Chargepipe~ VRSF Catless Downpipe~ CTS Intake~ FTP boost pipe~ FTP intake inlet~ FTP oil catch can~ Turbosmart dual bov~
	Appreciate 0 Tweet Quote

10-21-2019, 07:12 PM	#2
oma3710 Major 195 Rep 1,282 Posts Drives: ? Join Date: Apr 2012 Location: Simpsonville, SC iTrader: (1)	Anybody? I can give u a deposit until I return tool. __________________ __________________ SOLD! X5 35i sdrive- JB4 SOLD! 435i- Cary Jordan E30 Tune~ Dinan Turbo~ BM3 trans tune~ XDI-35~ 3.5 T-map sensor~ VRSF HD FMIC~ VRSF Chargepipe~ VRSF Catless Downpipe~ CTS Intake~ FTP boost pipe~ FTP intake inlet~ FTP oil catch can~ Turbosmart dual bov~
	Appreciate 0 Quote

10-23-2019, 04:06 AM	#3
frenchi Lieutenant 90 Rep 452 Posts Drives: F30 340i M Performance Join Date: Nov 2008 Location: France iTrader: (11)	This one works pretty well it's cheap and you can sell it once your job is done https://www.ebay.co.uk/itm/Bmw-Steer...1&isGTR=1#shId
	Appreciate 0 Quote

10-23-2019, 07:01 AM	#4
Billfitz Lieutenant General 8300 Rep 16,192 Posts Drives: '15 328iX GT Join Date: Jan 2015 Location: New Hampshire iTrader: (0)	It won't be so cheap to ship it across the Atlantic. However, it does show how to do what I would do if I needed one, which is to make one.
	Appreciate 0 Quote

06-08-2020, 07:11 PM	#13
R32DBP Lieutenant 181 Rep 396 Posts Drives: 2014 335i M Sport, 2004 .:R32T Join Date: Jul 2008 Location: New Jersey iTrader: (0) Garage List 2004 Volkswagen .:R32 [0.00] 2014 BMW 335i M Sport [0.00]	eBay link is dead but if you are trying to tighten the EPS I just used this adjustable spanner tool from Harbor Freight. It worked like a charm and no more clunking from steering. Tightened it up a bit too. https://www.harborfreight.com/adjust...nch-36554.html
	Appreciate 0 Quote