[estoque]

Just installed the h&r sport springs on my m4 which size spacers should I put? I was thinking 10mm front and rear I don’t want it to rub. Thanks

[ATX_G80]

Originally Posted by estoque

Just installed the h&r sport springs on my m4 which size spacers should I put? I was thinking 10mm front and rear I don’t want it to rub. Thanks

Do you have Pirelli's or Michelin's.

12/10 looks the best IMO but if you have Pirelli's you will rub with even 10s up front in reverse.

[estoque]

Originally Posted by ATX_G80

Do you have Pirelli's or Michelin's.

12/10 looks the best IMO but if you have Pirelli's you will rub with even 10s up front in reverse.

Yes I have pirellis what do you think I should do besides get michelines

[ATX_G80]

Originally Posted by estoque

Yes I have pirellis what do you think I should do besides get michelines

haha! I am in the same boat. You will only rub on the front left. There is a bulge in the front of the fender liner. I took a heat gun and messaged it back a couple mm's and I do not rub anymore.

[estoque]

Originally Posted by ATX_G80

haha! I am in the same boat. You will only rub on the front left. There is a bulge in the front of the fender liner. I took a heat gun and messaged it back a couple mm's and I do not rub anymore.

Do you have a link to spacers? Burger only has 10/13/15 and the 13/15 are back ordered

[ATX_G80]

https://europeanautosource.com/macht...g8x-m3-m4.html

[m20e3087]

I have H&R 13sq on order for M3 with MSS HAS. Check out this 13sq setup for M3. But for M4 some are running 18mm on the front.

https://www.hrsprings.com/projects/d...1-bmw-m3-sedan

[croman54321]

Originally Posted by estoque

Just installed the h&r sport springs on my m4 which size spacers should I put? I was thinking 10mm front and rear I don’t want it to rub. Thanks

10mm spacers, h&r springs, Pirelli's

[moproblems]

I did 15f 12.5r could go up to 18 in the front.

[tom @ eas]

10/12 is what we're installing with the Pirellis (Michelins you can get a bit more aggressive), we've got plenty of Macht Schnell spacers in stock.

[r33_RGSport]

Originally Posted by estoque

Just installed the h&r sport springs on my m4 which size spacers should I put? I was thinking 10mm front and rear I don’t want it to rub. Thanks

I've been doing 18/15 on MSS with my setup.
For H&R, I would do 15/12.

If the front rub, just need to cut 2 fins from the fender liner.

I will try to get a picture next time I am doing it.

[Vic55]

Originally Posted by r33_RGSport

I've been doing 18/15 on MSS with my setup.
For H&R, I would do 15/12.

If the front rub, just need to cut 2 fins from the fender liner.

I will try to get a picture next time I am doing it.

Sir sir sir

can I trade in my 15mm fronts for 18mm- I think you sold me short

ahhahahahahahah

[r33_RGSport]

Originally Posted by Vic55

Sir sir sir

can I trade in my 15mm fronts for 18mm- I think you sold me short

ahhahahahahahah

Should've took it off your M8.

[Vic55]

Originally Posted by r33_RGSport

Should've took it off your M8.

That just hurts--- Rude

[Vic55]

Originally Posted by r33_RGSport

Should've took it off your M8.

Need 18mm now

[r33_RGSport]

Originally Posted by Vic55

Need 18mm now

In stock.

[estoque]

I decided on ordering the flush kit from turner Motorsport which is 12.5/15 now only if they would ship it

[timstah]

Originally Posted by Vic55

Need 18mm now

Hey Vic, awesome build man.

Are your MSS springs up front set to max low? And how long did they take to "settle"? Thanks man!

[Vic55]

Originally Posted by liquid_doji

Hey Vic, awesome build man.

Are your MSS springs up front set to max low? And how long did they take to "settle"? Thanks man!

r33_RGSport

Tagging Ben- as he changed up the install to max out the front where no settling was needed but the ride remained the same