[smbimmer]

Looking for referrals for coding on a G80 M3 Comp xDrive as well as an F97 X3M Comp. I have been using the same guy for several cars but he has not been very responsive lately and I am looking to get my M3 done this week. Thanks.

[blackops23]

How in depth are the things you are trying to code? I was looking into remote options myself recently, but just bit the bullet and bought a cable and coded things myself along with the help from the forums.

[kjx]

https://www.codemybimmer.ca/

Used multiple times remotely for multiple BMWs including to code anti-dazzle for laser lights.

[smbimmer]

Originally Posted by blackops23

How in depth are the things you are trying to code? I was looking into remote options myself recently, but just bit the bullet and bought a cable and coded things myself along with the help from the forums.

Trying to unlock all of the features and eliminate the messages and chimes but especially the lights. I have the cable but not sure I want to tackle myself. Would rather pay someone to do it and know it's done right.

[smbimmer]

Originally Posted by kjx

https://www.codemybimmer.ca/

Used multiple times remotely for multiple BMWs including to code anti-dazzle for laser lights.

Do they code remotely? How do you get in contact with them?

[kjx]

Originally Posted by smbimmer

Do they code remotely? How do you get in contact with them?

https://www.codemybimmer.ca/product/...ing-us-canada/

Pay the $99 at the link and they’ll contact you at the e-mail address you provide.

If you have questions before buying, use the form:
https://www.codemybimmer.ca/contact/

You need a OBD to Ethernet cable, and a laptop to plug that into.

This is what they can code for you:
https://www.codemybimmer.ca/g-chassis-coding/

I found them initially because they were the only people who could code anti-dazzle on laser-lights properly. I use Bimmercode for all the “non-expert” settings so I can play around in my own time.

They’ve done my X5 twice (second time to recode anti dazzle after major software update) and M4 once (it’s only 8 months old). Second time coding is discounted and multi-car coding in the same session is also discounted a little - I contact them at the form for the special prices in that case.

[blackops23]

I'd do all of the non-expert mode as well since it's interesting to tinker around with and easy to revert back. It would be nice if they had a discounted price for the FDL and Dazzle.

[smbimmer]

Originally Posted by kjx

https://www.codemybimmer.ca/product/...ing-us-canada/

Pay the $99 at the link and they'll contact you at the e-mail address you provide.

If you have questions before buying, use the form:
https://www.codemybimmer.ca/contact/

You need a OBD to Ethernet cable, and a laptop to plug that into.

This is what they can code for you:
https://www.codemybimmer.ca/g-chassis-coding/

I found them initially because they were the only people who could code anti-dazzle on laser-lights properly. I use Bimmercode for all the "non-expert" settings so I can play around in my own time.

They've done my X5 twice (second time to recode anti dazzle after major software update) and M4 once (it's only 8 months old). Second time coding is discounted and multi-car coding in the same session is also discounted a little - I contact them at the form for the special prices in that case.

Thanks. Appreciate all the info. Wasn't sure when I checked out the first link and wasn't finding any reference for newer BMWs. Will likely give them a try.