[pdeshmukh]

I have a 24X1. I wanted to know if anyone was able to add shortcut to Activate/Deactivate Auto Start Stop Once. I tried long pressing the option but was not able to add it.

[SpaceSilver.X1]

Originally Posted by pdeshmukh

I have a 24X1. I wanted to know if anyone was able to add shortcut to Activate/Deactivate Auto Start Stop Once. I tried long pressing the option but was not able to add it.

on 2023 X1 with iDrive8, I have no problems adding that shortcut.(like in the screenshot below)

unfortunately, according to other members with 2024 X1 running iDrive9, they said it couldn't be done yet.

https://u11.bimmerpost.com/forums/sh...light=shortcut

[pdeshmukh]

Originally Posted by SpaceSilver.X1

on 2023 X1 with iDrive8, I have no problems adding that shortcut.(like in the screenshot below)

unfortunately, according to other members with 2024 X1 running iDrive9, they said it couldn't be done yet.

https://u11.bimmerpost.com/forums/sh...light=shortcut

Sadly on ID9, it does not allow me to press and hold to add a shortcut.

[SpaceSilver.X1]

Originally Posted by pdeshmukh

Sadly on ID9, it does not allow me to press and hold to add a shortcut.

You folks on the newer 2024 X1 with iDrive9 should complain to BMW more often.. that's one of the only ways to make them correct this ASAP. Good luck!

[markronnie]

I have 2024 x1 28i with ID9 & had no problem at all setting up the shortcut for both the primary & secondary drivers.

[abirmaher]

I can't do it on my 24 X1 either...

[pdeshmukh]

Originally Posted by markronnie

Yes, it came with iDrive 9

Can you please share how you managed to add a for it shortcut on your ID9.

[COOLGREANY]

Originally Posted by markronnie

I have 2024 x1 28i & had no problem at all setting up the shortcut for both the primary & secondary drivers.

How? I've only been able to setup a shortcut to the "Drivetrain and Chassis" section and then I have to press that to open another window and then select the Auto Start/Stop button.

[markronnie]

Sorry for the confusion, perhaps I misunderstood. I was able to set both primary & secondary drivers up with the shortcut for “Drivtrain & Chassis” I click on it to gain access to Deactivate stop/start function each time I get into x1.
I don’t find it difficult to do but like the hard button on my 2019 Acura RDX Advance better.

[SpaceSilver.X1]

Originally Posted by markronnie

hard button on my 2019 Acura RDX Advance better.

not sure about the RDX, but I helped a family friend install a bypass dongle in her MDX('16 or '17?) a few years ago. It permanently disabled the stupid engine idle stop/start "feature"

[markronnie]

https://www.bimmerpost.com/forums/sh...php?p=31122024