Just picked up a jb+

Goraiders21 · 05-14-2009, 01:09 AM

Hey as the title says just got a new jb+, I can't wait to install it me time bewtween Tommorow and Saturday whenever I can have access to a dyno.

Was wondering if ne one could hook me up with a link to a video or a good diy to help me install it.

Thanks

exidisjon · 05-14-2009, 01:13 AM

http://www.e90post.com/forums/showth...highlight=sstt
Should be the same.

theanhdy · 05-14-2009, 01:35 AM

I see you picked one up, congrats

http://burgertuning.com/instructions/jbplus.pdf

jayely1 · 05-14-2009, 01:42 AM

are these still throwing codes, even when its under 3/4?

RambleJ · 05-14-2009, 10:15 AM

Quote:

Originally Posted by jayely1

are these still throwing codes, even when its under 3/4?

I haven't seen one code with mine and I have it cranked up to 90% and I have been driving very spiritedly @ 90% for a couple of months.

RynoDyno312 · 05-14-2009, 10:18 AM

Quote:

Originally Posted by RambleJ

I haven't seen one code with mine and I have it cranked up to 90% and I have been driving very spiritedly @ 90% for a couple of months.

on 91 octane? what software are you running/build date and do you have any other upgrades?

I've been itching to turn mine up to 75%-ish but don't want to throw codes.

RambleJ · 05-14-2009, 10:23 AM

Quote:

Originally Posted by RynoDyno312

on 91 octane? what software are you running/build date and do you have any other upgrades?

I've been itching to turn mine up to 75%-ish but don't want to throw codes.

Yes I am running on 91 octane, I also have a mid 2007 build with no software updates, so I am running pre 29.2.
I have checked mine on the BT a couple times and not one code was thrown. Except for my failing fuel pump codes.. but who doesn't have those?

RynoDyno312 · 05-14-2009, 10:28 AM

Quote:

Originally Posted by RambleJ

Yes I am running on 91 octane, I also have a mid 2007 build with no software updates, so I am running pre 29.2.
I have checked mine on the BT a couple times and not one code was thrown. Except for my failing fuel pump codes.. but who doesn't have those?

Good to hear. My build date is 11/06 and my service records don't show any software updates (BMW had the HFFP replaced at 30K, so they may have done the software upgrade then).

I know I should just pick up the BT, but I have no experience running PC software on Macs and wouldnt know where to start.

RambleJ · 05-14-2009, 10:34 AM

Quote:

Originally Posted by RynoDyno312

Good to hear. My build date is 11/06 and my service records don't show any software updates (BMW had the HFFP replaced at 30K, so they may have done the software upgrade then).

I know I should just pick up the BT, but I have no experience running PC software on Macs and wouldnt know where to start.

The service report will state that a software upgrade was performed, if nothing of that nature is on there. They did not update your software.

RynoDyno312 · 05-14-2009, 10:52 AM

Quote:

Originally Posted by RambleJ

The service report will state that a software upgrade was performed, if nothing of that nature is on there. They did not update your software.

Badass. Cranky cranky here I come!

RambleJ · 05-14-2009, 11:18 AM

Quote:

Originally Posted by RynoDyno312

Badass. Cranky cranky here I come!

And since your in OC, the new RissRacing shop has a BT tool that they can check for codes for you for a small fee.

SROC3 · 05-14-2009, 02:00 PM

if you're running 91 octane, you theoretically should not turn it up past 75%.

jayely1 · 05-14-2009, 02:03 PM

where do you hook the BT tool up to? and how much are they? Sorry new to the JB+ but sounds like I need one!

ThorsHammer · 05-14-2009, 02:08 PM

Quote:

Originally Posted by jayely1

where do you hook the BT tool up to? and how much are they? Sorry new to the JB+ but sounds like I need one!

On the driver's side by the hood release, there is a little black cover that says OBDII or something like that. Pop that off and you'll uncover a plug (Onboard Diagnostics).

The Bav Tech plugs in there, and into your computer on the other end. It's very straight-forward. Anyone running a BMS tune (or doing anything with their exhaust/downpipes) should have this tool in my opinion.

Think of it as an insurance policy if nothing else.

lm1z · 05-14-2009, 02:17 PM

Congrats on the purchase!

So, if i'm pre 29.2 and I pick up a JB+, can I run at 100% with 93 octane w/ no probs? (theoretically)

Are the dynos correct on Terry's website? They seem really high. 340rwhp and 360rwtq? DAMN!

ThorsHammer · 05-14-2009, 02:20 PM

Quote:

Originally Posted by lm1z

Congrats on the purchase!

So, if i'm pre 29.2 and I pick up a JB+, can I run at 100% with 93 octane w/ no probs? (theoretically)

Are the dynos correct on Terry's website? They seem really high. 340rwhp and 360rwtq? DAMN!

Yes and Yes.

RynoDyno312 · 05-14-2009, 02:47 PM

Quote:

Originally Posted by RambleJ

And since your in OC, the new RissRacing shop has a BT tool that they can check for codes for you for a small fee.

I'm actually in Santa Barbara, but maybe HP Autowerks can check for codes.

I don't plan on pushing past 75% on 91, but knowing whats going on the ECU would be nice.

Terrance28 · 05-14-2009, 03:03 PM

Quote:

Originally Posted by RynoDyno312

Good to hear. My build date is 11/06 and my service records don't show any software updates (BMW had the HFFP replaced at 30K, so they may have done the software upgrade then).

I know I should just pick up the BT, but I have no experience running PC software on Macs and wouldnt know where to start.

Using the BT is very simple. It almost fool proof.

05-14-2009, 01:09 AM	#1
Goraiders21 Entizy 7 31 Rep 256 Posts Drives: C63 Coupe, Retired M6, 335i Join Date: Jan 2009 Location: Southern Orange County iTrader: (2)	Just picked up a jb+ Hey as the title says just got a new jb+, I can't wait to install it me time bewtween Tommorow and Saturday whenever I can have access to a dyno. Was wondering if ne one could hook me up with a link to a video or a good diy to help me install it. Thanks __________________ Muffler Delete / Tiag&Cf Aero Lip / CF M3 Lip / CF Mirror Covers / CF Roof / Blacked Out: Grill, Tail lights, Window Trim, Powder Coated Rims / CF Emblems
	Appreciate 0 Tweet Quote

05-14-2009, 01:13 AM	#2
exidisjon PuffPuffPass 52 Rep 1,096 Posts Drives: E92 335xi AW/Saddle Join Date: Aug 2008 Location: NJ iTrader: (8)	http://www.e90post.com/forums/showth...highlight=sstt Should be the same. __________________ My right foot weighs more than my left for sure.
	Appreciate 0 Quote

05-14-2009, 01:35 AM	#3
theanhdy Major 95 Rep 1,083 Posts Drives: 135i Join Date: Nov 2007 Location: SOCAL SFV iTrader: (7)	I see you picked one up, congrats http://burgertuning.com/instructions/jbplus.pdf
	Appreciate 0 Quote

05-14-2009, 01:42 AM	#4
jayely1 Colonel 228 Rep 2,077 Posts Drives: 335i Join Date: Jun 2008 Location: New Mexico/Illinois iTrader: (1)	are these still throwing codes, even when its under 3/4?
	Appreciate 0 Quote

05-14-2009, 02:00 PM	#12
SROC3 The limit of adhesion is my home. 1703 Rep 3,778 Posts Drives: Like a Boss. Join Date: Sep 2006 Location: three.one.zero iTrader: (1)	if you're running 91 octane, you theoretically should not turn it up past 75%. __________________ 2019 X3 xDrive30i Glacier Silver \| Cognac w/ Fine Cove \| MSport \| Premium \| Dynamic Handling PKG \| Drive Assist \| HK w/ Bavsound Upgrade \|
	Appreciate 0 Quote

05-14-2009, 02:03 PM	#13
jayely1 Colonel 228 Rep 2,077 Posts Drives: 335i Join Date: Jun 2008 Location: New Mexico/Illinois iTrader: (1)	where do you hook the BT tool up to? and how much are they? Sorry new to the JB+ but sounds like I need one!
	Appreciate 0 Quote

05-14-2009, 02:17 PM	#15
lm1z Major 197 Rep 1,278 Posts Drives: 2017 GT350 Join Date: Aug 2007 Location: Frisco, TX iTrader: (22)	Congrats on the purchase! So, if i'm pre 29.2 and I pick up a JB+, can I run at 100% with 93 octane w/ no probs? (theoretically) Are the dynos correct on Terry's website? They seem really high. 340rwhp and 360rwtq? DAMN!
	Appreciate 0 Quote