[STICKY335]

Okay well looks like im in the market for an intake and am looking for some feedback...... ;-) From your experiences what would be the best intake that would give good performance and the best sound! Would really appreciate the feedback guys!

[WilliamE92]

[iBoost]

BMS DCI = if you want sound/ bang for the buck
INJEN = flashy
Mr5 intake(DIY) = best performance another bang for the buck...

if you need more info SEARCH you'll find a lot of good info.

[huyner328]

[STICKY335]

Ive done alot of searching but i havent really got feedback from the people thats why i was asking.....

[GreenPlease]

Look for the "Mr. 5" intake. You're hard pressed to do much better than that IMO. The primary choke point on our intake systems, in my view, are those tiny plastic tubes that run from the airbox to the compressor inlets. One runs infront of the engine and one runs behind the engine. They actually flatten out for a good portion of their length and are perfectly placed to soak up heat. No way out of using those tubes until we get a single turbo setup.

[creaminz]

aFe just came out with new Intake design, problem is...that chit cost $1000 Lol

[uberschnell]

Dinan CAI is one of the best looking, and possibly best performing also

[STICKY335]

Originally Posted by creaminz

aFe just came out with new Intake design, problem is...that chit cost $1000 Lol

yah i noticed that too.... thats a bit over priced lmaooo!

kinda looking into the injen but not sure!

[Htown09]

Originally Posted by ADO3

Ive done alot of searching but i havent really got feedback from the people thats why i was asking.....

AD best intake hands down is BMS single cone intake. It is easy as heck to install and makes your car sound like a jet. I tried other intakes, even the CAI kit before and the bms intake is a lot better sounding and get's more airflow.

Don't listen to people who tell you about hot air cause that's all their blowin. If you get a 335i you want a FMIC and Meth kit for all your cooling mods and then an air intake that will suck in the most air. BMS single cone intake sucks in a ton of air and it's proven on the track and the sound is just incredible. Oh and it's only 119 bucks and easy to install! If I tried this intake first I would have never switched. I was amazed at the sound after removing my CAI kit so you will be amazed coming from the stock intake.

[RBC]

If I was to buy now, I would buy the Stett

[STICKY335]

Originally Posted by Htown09

AD best intake hands down is BMS single cone intake. It is easy as heck to install and makes your car sound like a jet. I tried other intakes, even the CAI kit before and the bms intake is a lot better sounding and get's more airflow.

Don't listen to people who tell you about hot air cause that's all their blowin. If you get a 335i you want a FMIC and Meth kit for all your cooling mods and then an air intake that will suck in the most air. BMS single cone intake sucks in a ton of air and it's proven on the track and the sound is just incredible. Oh and it's only 119 bucks and easy to install! If I tried this intake first I would have never switched. I was amazed at the sound after removing my CAI kit so you will be amazed coming from the stock intake.

You got me convinced looks like i have some more researching to do then.....

[klipseracer]

There will be a new intake coming to the market in the not so distant future that people may want to keep in the back of their minds.

[JerzeySux]

Pipes, clamps, filters they all do almost the same shit imo. Stock feels the best for me lol. I went with BMS DCI to AFE DCI back to stock.

[smack]

Originally Posted by creaminz

aFe just came out with new Intake design, problem is...that chit cost $1000 Lol

I cant beleive they priced it that high. Thats Dinan territory.

[cstavaru]

If your thread was named "Best intake ?" like it should, and not "Best intake !" it would have been better.

[Spydeputy]

I believe MR 5, who might be one of the best insiders on this topic has stated his opinion on this, about Dinan's CAI
QUOTE; I think that these results are to be expected.
You are freeing up a good amount of air that the engine needs at that high rpm. IMO, this is THE best production intake available for our engines.
__________________
Quickest 335i 1/8 Mile at 7.58
Quickest/Fastest e90 6MT 335i at 11.80 at 116.2

[Former_Boosted_IS]

I have the STETT CAI on my car and I put down 487 rwhp on a Mustang dyno (or 526 rwhp dynojet corrected). I don't think anyone has put more down on a Mustang Dyno than I have, so the STETT has proven its abilities.

[jake89714]

UR intake

[huyner328]

Originally Posted by Former_Boosted_IS

I have the STETT CAI on my car and I put down 487 rwhp on a Mustang dyno (or 526 rwhp dynojet corrected). I don't think anyone has put more down on a Mustang Dyno than I have, so the STETT has proven its abilities.

Pretty sure STETT CAI can't take all the gold for that win.

[Former_Boosted_IS]

Originally Posted by huyner328

Pretty sure STETT CAI can't take all the gold for that win.

They are part of the equation, granted a big equation.

[ModBargains.com]

Don't forget to check out the AFE Cold Air intake as well as the AFE Stage 2 Elite Sealed SI intake for the N54!