[rabyrab]

Anyone that would like the best sounding exhaust (in my opinion) for their 335 sedan at a fraction of the price here is you're chance. Must be able to drive to D.C. area where CP-E is located.

I am working with Josh/CP-E and I will be doing a Group buy once we get a sedan at CP-E for fitment and thereafter they will have about 30 exhaust to sell within a month.

This exhaust is for the 335i coupe and sedan, but we need a sedan to be fitted with this exhaust before it can be released on the market.

There is no quad tips available at this time, just a dual exhaust will be available.

This is a easy bolt-on system that uses T-304 Stainless Steel, the flanges go right onto this system with no cutting necessary like the Borla system.


Custom Performance Engineering
6802 Mid Cities Avenue.
Beltsville, MD 20705

Start from outside

Start from inside

Fly by from outside

Fly by

The first run was made with a stock 335i, and the second run was made with the addition of the cp-e catback. No other performance parts were on the car.

[Mr. 5]

I wish I had my car but i won't get it until the 1st week of June.

[scollins]

I wish I wasn't in "the other Washington"!! WA state to MD...... Hmmm, major road trip!

[Sal@AUTOcouture]

I'm in NJ.....how long would this take??

[ThinkEntropy]

Hey guys, my name is Jordan and I'm one of the mechanical engineers at cp-e. rabyrab was kind enough to start this thread for us, but I wanted to hop in here to see if I could be of any help answering questions. If you have any questions about our company, our products, or this exhaust in particular, please post them up!

Originally Posted by AutoCouture

I'm in NJ.....how long would this take??

It really depends on how much a of a difference there is between the coupe and the sedan. We heard that the difference is subtle, but it does require two different designs. If the difference is as subtle as we think it will be, then it shouldn't take more than a day to finish. Then again the unexpected does happen, so if you can only be here for a day I would have to speak with the other guys and go over a "worst case scenario" to ensure that we could get you out the door at a reasonable hour.

[SGP335i]

NJ is about 3-4 hours

[Sal@AUTOcouture]

Originally Posted by ThinkEntropy

Hey guys, my name is Jordan and I'm one of the mechanical engineers at cp-e. rabyrab was kind enough to start this thread for us, but I wanted to hop in here to see if I could be of any help answering questions. If you have any questions about our company, our products, or this exhaust in particular, please post them up!




It really depends on how much a of a difference there is between the coupe and the sedan. We heard that the difference is subtle, but it does require two different designs. If the difference is as subtle as we think it will be, then it shouldn't take more than a day to finish. Then again the unexpected does happen, so if you can only be here for a day I would have to speak with the other guys and go over a "worst case scenario" to ensure that we could get you out the door at a reasonable hour.

JUST what I needed to hear. PM me the details and I'll make arrangements to get off work.

Sal

[mesier1111]

Damn, I have a coupe-----wish you needed a coupe

[Swoop]

yo...I'm in

[Swoop]

and in Dcizzle....

[Swoop]

here's a pic of the car....it would sound so nice on it, don't you think?

[PSI Power]

I too am in the DC area but do not have my car yet.
Please keep us informed of product updates and pricing.
Thx.

[ThinkEntropy]

Wow, truth be told, I had no idea that we'd have so many local interested parties. This is great!

When I get back in the shop tomorrow I'll get the requisite info and PM it to everyone who has shown interest in helping us test fit this exhaust system. Thanks again guys, and I'll keep everyone posted!

[Mr.F1 Fan]

Originally Posted by Swoop

here's a pic of the car....it would sound so nice on it, don't you think?

Is there anything you won't buy?
Modders anonymous can help!

[Swoop]

Originally Posted by Mr.F1 Fan

Is there anything you won't buy?
Modders anonymous can help!

well, technically, yes....I want to keep the car classy but unique....nothing too crazy. Besided, exhaust was one of my wants, but certainly couldn't afford it....

[Blk07335i]

Originally Posted by ThinkEntropy

Hey guys, my name is Jordan and I'm one of the mechanical engineers at cp-e. rabyrab was kind enough to start this thread for us, but I wanted to hop in here to see if I could be of any help answering questions. If you have any questions about our company, our products, or this exhaust in particular, please post them up!




It really depends on how much a of a difference there is between the coupe and the sedan. We heard that the difference is subtle, but it does require two different designs. If the difference is as subtle as we think it will be, then it shouldn't take more than a day to finish. Then again the unexpected does happen, so if you can only be here for a day I would have to speak with the other guys and go over a "worst case scenario" to ensure that we could get you out the door at a reasonable hour.

I'm in NJ as well. What is the price? I am interested as well. PM me the details. My schedule is flexible so I could arrange to be in the area for more than one day if necessary.

[JKratty]

Gents,

If you need another guinea pig, I'm in DC. Just PM me if interested!

[Swoop]

I'm free most days, btw. Could probably drop off in the am and lave it for the day...or could leave it all this weekend (Friday-Monday)

[Mr.F1 Fan]

Originally Posted by Swoop

well, technically, yes....I want to keep the car classy but unique....nothing too crazy. Besided, exhaust was one of my wants, but certainly couldn't afford it....

Do you have the Procede? I can't remember. I'm kinda torn about it. Exhaust may be all I need and as long as it's not too ghastly loud, I might go there first. I'm looking for about 10+hp and 10+lb ft which most seem to be getting with exhaust. I just don't want it too loud.
I look forward to seeing what you end up with.
BTW, I wasn't busting your balls! Just my vain attempt at humor.

-F1

[Swoop]

Originally Posted by Mr.F1 Fan

Do you have the Procede? I can't remember. I'm kinda torn about it. Exhaust may be all I need and as long as it's not too ghastly loud, I might go there first. I'm looking for about 10+hp and 10+lb ft which most seem to be getting with exhaust. I just don't want it too loud.
I look forward to seeing what you end up with.
BTW, I wasn't busting your balls! Just my vain attempt at humor.

-F1

Oh no worries, i know you weren't busting my balls. I agree about the exhaust, i don't want too loud.....Something classy and I thought this one sounded pretty darn good (at least through my speakers). Procede- no....TT - soon....on the DL though...I'll keep you posted when and if this works out...

[Mr.F1 Fan]

Originally Posted by Swoop

Oh no worries, i know you weren't busting my balls. I agree about the exhaust, i don't want too loud.....Something classy and I thought this one sounded pretty darn good (at least through my speakers). Procede- no....TT - soon....on the DL though...I'll keep you posted when and if this works out...

Nice! You're not going Saturday, right?...I'm shooting for something again next wednesday..keep that in mind!

-F1

[rabyrab]

Once we get the exhaust fitted on the sedan then there will be a group buy. There will be a minimum of 10 people required for CP-E to start producing these exhaust. After they install the 1st sedan Jordan or Josh will post up pics and video of this.

There will be an introductory price for the group buy, all coupes and sedans are welcome on this group buy. We are anticipating the fitment in the sedan will take 1 to 2 weeks then producing them will take place in 3 weeks time from there.

Congrats on the lucky e90 to get the 1st sedan (only) exhaust from CP-E at a discount price, not bad!