|
|
04-17-2021, 07:05 PM | #1 |
New Member
5
Rep 19
Posts |
E92 M3 stripped transmission strainer threads...
I changed the oil in my 6-speed transmission. After I drained the oil, I removed the oil strainer to replace it with a new one. When I put the new strainer in, I hand tightened it and used a torque wrench to complete the job.
After another 1/2 turn, I noticed the strainer wasn't tightening. At this point I knew something was wrong. I removed the strainer and the threads of the transmission case were stripped. The strainer will snug down, but I'm not confident it's going to stay in place. I've searched for a fix for oil strainer thread repair, but have only found fill and drain plug solutions. Do you know of a helicoil thread repair kit or some other solution to fix those threads in the case? If you do, please let me know. TIA |
Post Reply |
Bookmarks |
|
|