10-05-2021, 02:33 PM | #1 |
Enlisted Member
0
Rep 35
Posts |
Airbags restraint system error after coding with e-sys
Hi guys,
Probably i did something stupid, but i got this big error stating airbags fault / restraint system, and i am not sure what to do now. What i did Is that I just wanted to recode new headlight modules So i connected with e-sys via VIN, Then expert - coding, FA activate, then read ECU And last - right click on the modules tree and CODE Few errors followed up and at the end i ended with lots of faulty airbag errors and the restrained system on the display. Attaching some pictures of the errors Any help /advise what to do will be appreciated Ps. I have tried the external application option which i found in the forums which supposed to clear that, but w/o success. |
10-06-2021, 02:33 AM | #3 |
Enlisted Member
0
Rep 35
Posts |
Not now, there were no changes to the VO after this coding, but the vo is not the original in general there is 1 replaced item /number which was done about 1 year ago
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|