BMW 1 Series exhaust cutout/straight pipe adapter

[blacksh33p]

BIMMERPOST / Classifieds

Asking Price:

USD 75.00

Item Interest

BadlanzHPE 2.75" custom exhaust cutout Y-adapter, never installed.

This was measured for MPE and is flared for cut out and mount with clamps, no welding. Just mark off 6" to remove, slip over, and clamp down.

Includes necessary hardware, not shown is the turndown pipe which will be included. This lets you straight pipe your 1 series M Performance Exhaust when you want by either using the included plate or adding in an electronic or vacuum-actuated valve cover (which was my original plan). The inner diameter for each flared end of the Y pipe/cutout adapter (that would go between your midpipe and exhaust) is roughly 70mm on both ends.

Images:

View post on imgur.com

$75 shipped to CONUS

Venmo/Paypal FF/CashApp/Zelle/Crypto accepted.

[blacksh33p]

The inner diameter for each flared end of the Y pipe/cutout adapter (that would go between your midpipe and exhaust) is roughly 70mm on both ends.