|
|
|
07-14-2023, 10:31 AM | #1 |
New Member
2
Rep 8
Posts |
BMW 1 series coupe Pedestrian Protection System
Hello, Does anyone have any idea on what i could do next. My 1 series coupe with the pedestrian protection system was involved in a accident causing the system to go off. I have now repaired the car since but cant seem to remove an Airbag light associated with the system. I have tried to remove the system from the VO in the Cas, FRM and nfrm. but after writing the FA in NCS expert i am not able to open or recode the ABG module at all. I have even tried to replace the ABG module with a similar model/year but the same errors. Finally i have tried to recode the system in and replace the sensors still no luck. these are my current errors stored on the system. no pedestrian system light anymore but an Airbag error is on the dash.
any help appreciated (photos attached are of current errors stored, and error messages in ncs when i attempt to open Abg or recode it.) |
08-06-2023, 03:23 PM | #2 |
Private First Class
86
Rep 175
Posts
Drives: A4 1.8TQM, 135is DCT
Join Date: Jan 2023
Location: Milwaukee
|
I'm sure you read through this but otherwise, it may help https://www.babybmw.net/threads/help...n.84867/page-2
__________________
2013 BMW 135is Coupe | Dinan Stage 3 | Dinan Monoball Joints | Dinan Toe Links | 1M Subframe Bushings | 1M Strut Bar | MPSS - BMW 313M's 18x7.5 / 18x8.5 | Min Grey, Savanna | Prem, Tech | DCT | #341/586
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|